Maxum 2100SC Spécifications télécharger pdf (Page 35)

Chapter 6: Plumbing

Freshwater System Winterization

1. Turn On the water system switch.

2. Open all of the faucets and showers and let the water system drain completely.

3. Turn Off the water system switch.

Any remaining water must be removed from the water lines. There are two ways to remove the remaining water from

the lines:

• Compressed Air

• Gravity Draining

Compressed Air

You must have an air compressor with an air hose

and an air nozzle.

1. Remove the water line from the outlet side of

the water pump (opposite side from filter).

2. Open the faucet that is furthest away from the

water pump.

3. Place the air nozzle against the end of the just

removed water line and blow air through

the system.

4. When water stops coming out of the Open fau-

cet, stop the air and Close the faucet.

5. One at a time, repeat this process on all faucets

and showers.

Gravity Draining

1. Open all faucets and showers.

2. Remove the drain plug from the tee fitting on

the freshwater tank.

3. When the water has stopped draining from the

freshwater tank, replace the drain plug.

CAUTION!

WATER SYSTEM DAMAGE HAZARD!

Never blow compressed air through the water system when all of the faucets are Closed.

FRESHWATER TANK

FILTER

WATER PUMP

OUTLET SIDE

WATER LINE

INLET SIDE

WATER LINE

DRAIN PLUG

TEE FITTING

TYPICAL VIEWNOTE: LOCATION OF

TEE FITTING & DRAIN

PLUG MAY VARY

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 67 68

Commentaires sur ces manuels

Pas de commentaire

Maxum 2100SC Spécifications Page 35

Commentaires sur ces manuels

Produits connexes et manuels pour Ventilateurs et séchoirs à air Maxum 2100SC